 |
Product Description
Features:
1.The bed base is integrally cast,35 degree slant bed is more convenient for workpiece up and down and iron filings discharge.
2.Imported linear rails are used for both X and Z directions, which reduces the wear of the machine tool. The super-large preload of the linear rail reduces the gap between the guide rails and increases the machining accuracy.
3.Spindle unit used in the whole series
4.Turret, hydraulic chuck, hydraulic tailstock ,increasing the versatility and automation of the lathe.
5.Full enclosed way covers ,better water-resistant and scrap-iron-resistant
| Specifications | CK50L |
| Chuck size | 8inch |
| Max. swing over bed | 500mm |
| Max. length of workpiece | 400mm |
| Standard machining dia. | 200mm |
| Max. swing over cross slide | 320mm |
| Spindle bore | 62mm |
| Spindle hole after hydr. | 52mm |
| Spindle nose | A2-6 |
| Spindle taper | 70mm(1:20) |
| Spindle speed | 4000rpm |
| Main motor power | 7.5/11kw |
| X axis travel | 260mm |
| Z axis travel | 400mm |
| X/Z rapid traverse | 20000mm/min |
| Tool post | 8*12 |
| Type of tailstock | Hydraulic |
| Taper of tailstock quill | MT4 |
| Travel of tailstock quill | 80mm |
| Slant bed degree | 35degree |
| Overall dimension(LxWxH) | 2650×1650×1830mm |
| Weight | 3700kgs |
0086 566 2091958 
