1.The bed base is integrally cast,35 degree slant bed is more convenient for workpiece up and down and iron filings discharge.
2.Imported linear rails are used for both X and Z directions, which reduces the wear of the machine tool. The super-large preload of the linear rail reduces the gap between the guide rails and increases the machining accuracy.
3.Spindle unit used in the whole series
4.Turret, hydraulic chuck, hydraulic tailstock ,increasing the versatility and automation of the lathe.
5.Full enclosed way covers ,better water-resistant and scrap-iron-resistant
|Max. swing over bed||500mm|
|Max. length of workpiece||750mm|
|Standard machining dia.||200mm|
|Max. swing over cross slide||360mm|
|Spindle hole after hydr.||52mm|
|Main motor power||7.5/11kw|
|X axis travel||250mm|
|Z axis travel||750mm|
|X/Z rapid traverse||20000mm/min|
|Type of tailstock||Hydraulic|
|Taper of tailstock quill||MT4|
|Travel of tailstock quill||80mm|
|Slant bed degree||35degree|