CJM320A Gear-Head Metal Lathe
Product Description
Features:
1) Precision ground and hardened bed ways.
2) The spindle is supported with precision roller bearings.
3) Headstock gears are made of high quality steel, ground and hardened.
4) Easy operating speed change levers.
5) With or without cabinet according to requirement.
| Specification | Model CJM320A |
| Max. swiming over bed | 320mm |
| Max. swing over cross slide | 210mm |
| Max. length of work piece | 750mm(36") |
| Spindle Bore | 38mm |
| Spindle Taper | MT5 |
| Max. lateral stroke over tool post | 170mm(6") |
| Metric pitches | 0.5-4 mm |
| Inch pitches | 9-40 T.P.I |
| Longitudinal-feed range | 0.025-0.34mm/r |
| Max. travel of tailstock sleeve | 70mm(2-3/4") |
| Tailstock sleeve taper | MT3 |
| Spindle speeds range | 60-1600r/min(50hz) |
| Motor | 1.1Kw |
| NW/GW (without stand) | 320/340Kg |
| Packing size (without stand) | 1500*650*115 mm |
| Packing size | 158*810*1450 mm |
Standard:
1) 3-jaw chuck
2) Dead centers MT3
3) Change gears set
4) Splash guard
5) Oil gun
6) Toolbox with tools