| Specification | CW61180 |
| Swing over bed | 1800mm |
| Bed width | 1100mm |
| Workpiece length | 1500/ 3000/ 5000/ 6000/ 8000/ 15000mm |
| Swing over toolpost | 1600mm |
| Max. turning length | 1300/ 2800/ 4800/5800/7800/14800mm |
| Toolpost feed kinds each spindle rotate | 56 kinds |
| Toolpost cross feed range each spindle rotate | 0.1-12mm/r |
| Toolpost longitudinal feed range each spindle rotate | 0.05-6mm/r |
| Upper toolpost | 0.025-3mm/r |
| Metric thread | 43 kinds 1-20mm |
| Inch thread | 29 kinds 28-3/8 teeth / inch |
| Module thread | 45kinds 0.5-60mm |
| Pitch thread | 25 kinds 1-56mm |
| Spindle bore | 130mm |
| Spindle front taper | Metric 140 |
| Spindle speed steps and range forward | 21 kinds 2-200r/min |
| Reverse | 12 kinds 2.24-178 r/min |
| Max.section of tool | 45×45mm |
| Toolpost longitudinal travel | 630mm |
| Upper toolpost travel | 300mm |
| Toolpost rapid movement Longitudinal/Cross/Upper | 3470/1870/935mm/min |
| Center sleeve dia and travel | 210×300mm |
| Tailstock taper | MT6 |
| Tailstock longitudinal movement | ±25 |
| Main motor | Y180L-4 22KW |
| Main transsion V belt specification | 2540C 2880C |
| Carriage rapid motor | JC02-21-2-1.5KW |
| Coolant pump | JCB-45 0.15KW |
| Coolant pump flow | 45L/min |
| 4-jaw chuck | 1250/1400mm |
| Steady rest | 50-600mm |
| Follow rest | 50-220mm |