| Model | Z5040ET | Z5040T |
| Electronic power feed | Machinery power feed |
| Max.drilling capacity | 40 |
| Threading in steel & last iron | M20&M24 |
| Spindle travel | 180mm |
| Spindle taper | MT4 |
| Spindle power feed | 2steps/0.1-0.2mm/rev |
| Spindle speed | 50-1450rpm |
| Width of T-slot | 18mm |
| Max.distance from spindle axis to surface of column | 350mm |
| Max.distance from spindle end to surface of table | 770mm |
| Max.distance from spindle end to surface of base | 1210 |
| Table size | 560×560 |
| Base size | 730×500 |
| Motor power | 0.85/1.5kw |
| NW/GW | 465kg/615kg |
| Packing size L x W x H) | 2270×690×1100mm |