How to Debug CNC Machine Tools?

CNC machine tool is a kind of high-tech mechatronics equipment. It is very important to adopt the correct way to start-up and debug, which largely determines whether the NC machine tool can exert normal economic benefits and its own service life.

Check before starting: Check the peripheral environment of the machine tool, whether there is any abnormal phenomenon such as water in the electrical box, and whether the oil has deteriorated.

Step-by-step startup: The power voltage of the machine must be detected before the machine is turned on. The power switch of the machine must be turned on after the main power switch has been turned on for about 10 minutes before turning on the power switch of the machine. Too low, turn on the power of the machine tool without abnormal conditions and observe whether there is any abnormal phenomenon or air leakage. Do not perform any action when there is no alarm when the machine is turned on, and let the electrical components be energized for 30min.

Slow-motion: Check for interference, move the machine with the handwheel all the way, pay attention to any abnormalities, and then perform the origin return step.

Machine tool break-in: Automatically run the machine at a slow speed for a long time, and rotate the spindle at a low speed.