Views:10 Author:Site Editor Publish Time: 2020-05-19 Origin:Site
Clean the dust on the exposed guide rail surface and sliding surface of the machine tool and add oil.
Lubricate all parts as required.
Check the position of each handle.
Empty car test run.
Strictly abide by the operating procedures.
Pay attention to the operation of the machine at any time during operation, and deal with any abnormality in time.
Clean all iron scraps.
Clean all parts of the machine.
Wipe all parts of the machine tool completely and keep the paint visible and the iron visible.
Check whether the fastener is loose.
Check and clean the wool and felt.
Lubrication of components.