Chinese Engine Lathe C6250CX1000 Manual Engine Lathe Machine
Product Description
Main Features:
1. The bed rails are quenched and precision ground.
2. The spindle is supported with precision roller bearings.
3. Head stock gears are made of high quality steel ground and hardened.
4. Monoblock cast iron base ensures high rigidity of the whole machine.
2. The spindle is supported with precision roller bearings.
3. Head stock gears are made of high quality steel ground and hardened.
4. Monoblock cast iron base ensures high rigidity of the whole machine.
| Specification | C6250C/C6250F |
| Max. swing over bed | 500mm |
| Max. swing over cross slide | 330mm |
| Max. swing over gap | 660mm |
| Effective length of gap | CC: 160mm CF: 160/130/130mm |
| Distance between centers | 750/1000/1500/2000/3000mm |
| Bed width | 360mm |
| Spindle bore | 52mm(optional:82mm) |
| Spindle nose | ISO-C6 |
| Spindle taper | MT6 |
| Spindle speed(Number) | CC: (9 steps) 40-1400rpm; CF: (12 steps) 16-1600rpm |
| Metric threads range | CC: 19 kinds 0.25-14mm; CF: 17 kinds 0.25-7mm |
| Inch threads range | CC:27 kinds 2-40inch CF:30 kinds 5-144inch |
| Module threads range | CC: 11 kinds 0.5-3.5mπ; CF:12 kinds 0.25-3.5mπ |
| Max. travel of top slide | 95mm |
| Max. travel of cross slide | 250mm |
| Max. section of tool | 20×20mm |
| Dia. of tailstock sleeve | 65mm |
| Taper of tailstock sleeve | MT5 |
| Max. travel of tailstock | 140mm |
| Main motor power | 4kw or 5.5kw |
| Coolant pump motor | 125w |
| Packing size | 2250/2450/2880×1150×1650mm |
| N.w/G.w | 750mm: 1350/1750kg 1400/1800kgs 1500/1900kg |
| 1000mm: 1450/1480kg 1500/1850kg 1600/1950kg | |
| 1500mm: 1600/1950kg 1650/2000kg 1750/2100kg |