| Specification | CD6240B/C |
| Max.swing over bed | Φ400mm |
| Max.swing over cross slide | Φ225mm |
| Max.swing over gap | Φ550mm |
| Effective length of gap | 260mm |
| Center Distance | 1000mm/1500mm/2000mm/3000mm |
| Bed Width | 330mm |
| Spindle hole | B:Φ65mm,C: Φ80mm |
| Spindle nose | B:ISO-D6,C:ISO-D8 |
| Spindle speed(Number) | B:20-1800rpm(15steps) C:/24-1600rpm(15steps) |
| Longitudinal feeds range | 66kinds 0.072-4.038mm/rev(0.0027-0.15inch/rev) |
| Cross feeds range | 66kinds 0.036-2.019mm/rev(0.0013-0.075inch/rev) |
| Metric threads range | 66kinds 0.5-28 |
| Inch threads range | 66kinds 1-56inch |
| Module threads range | 33kinds 0.5-3.5mπ |
| Diametric threads range | 33kinds 8-56D.P |
| Max.travel of top slide | 130mm |
| Max.travel of cross slide | 300mm |
| Max.size of tool shank | 20×20mm/25×25mm |
| Dia.of tailstock sleeve | Φ65mm |
| Taper of tailstock sleeve | MT5 |
| Max.travel of tailstock | 120mm |
| Main drive motor | 5.5kw or 7.5kw |
| Rapid traverse motor | 250w |
| Coolant pump motor | 125w |
| Packing size | 1000mm:2420mm×1150mm×1800mm 1500mm:2920mm×1150mm×1800mm 2000mm:3460mm×1150mm×1800mm 3000mm:4720mm×1150mm×1800mm |
| N.W/G.W | 1000mm:1560/2210kgs 1600/2250kgs 1640/2290kgs |
| 1500mm:1770/2410kgs 1830/2470kgs 1870/2530kgs |
| 2000mm:2010/2780kgs 2070/2820kgs 2130/2860kgs |