| Model | CD6250B |
| Max. swing over bed (mm) | 500 |
| Max. swing over cross slide(mm) | 325 |
| Center distance (mm) | 1000, 1500, 2000,3000 mm |
| Max swing in gap (mm) | 630 |
| Valid length of gap | 260mm |
| Bed width | 330mm |
| Spindle hole | 65mm |
| Spindle nose | ISO-C6 or ISO-D6 |
| Spindle taper | Metric 70mm |
| Spindle speeds (Number) | 22-1800rpm (15 steps) |
| Metric threads range (Kinds) | 0.5-28mm (66kinds) |
| Inch Threads range (Kinds) | 1-56 /inch(66kinds) |
| Module threads range (Kinds) | 0.5-3.5mm (33kinds) |
| Diametral threads range (Kinds) | 8-56 DP(33kinds) |
| Longitudinal fees range (Kinds) | 0.072-4.038mm/rev(66kinds) |
| Cross feeds range (Kinds) | 0.036-2.019mm/rev(66kinds) |
| Cross slide travel | 300mm |
| Compound rest travel | 130mm |
| Cross-section size of toolshank | 25*20mm |
| Taper of tailstock sleeve | Morse No.5 |
| Diameter of tailstock sleeve | 65mm |
| Travel of tailstock sleeve | 120mm |
| Motor | 5.5kw |