| Specifications | CQ6240F |
| Max. swing over bed | 400mm |
| Max. swing over cross slide | 264mm |
| Max. swing in gap | 550mm |
| Distance between centers | 1000mm |
| Width of bed | 206mm |
| Spinde bore | φ 51mm/D5 |
| Spindle taper | MT5 or MT6 |
| Spindle speed | 45-1800rpm 16 steps |
| Max. section of cutting tool | 16x16mm |
| Threads inch pitches | 4-56TPI / 28 kinds(Metric lathe),4-112TPI / 40 kinds (Inch lathe) |
| Threads metric pitches | 0.4-7mm / 28 kinds(Metric lathe),0.45-7.5mm / 22 kinds(Inch lathe) |
| Longitudinal feeds | 0.043-0.653mm/rev (Metric lathe),0.0012-0.0297in/rev (Inch lathe) |
| Tailstock quill taper | MT3 |
| Tailstock quill travel | 100mm |
| Tailstock quill diameter | 45mm |
| Main motor power | 1.5/2.4KW |
| Cross slide travel | 150mm |
| Compound rest travel | 90mm |
| N.W/G.W | 700/800kgs |
| Packing size | 1950x750x1500mm |