Features:
1.The bed base is integrally cast,35 degree slant bed is more convenient for workpiece up and down and iron filings discharge.
2.Imported linear rails are used for both X and Z directions, which reduces the wear of the machine tool. The super-large preload of the linear rail reduces the gap between the guide rails and increases the machining accuracy.
3.Spindle unit used in the whole series
4.Turret, hydraulic chuck, hydraulic tailstock ,increasing the versatility and automation of the lathe.
5.Full enclosed way covers ,better water-resistant and scrap-iron-resistant
Specification | SWL8 |
Capacity |
Chuck size | 8”, *10'' |
Max. swing dia. over bed | φ450mm |
Max. length of workpiece | 450mm |
Max. swing dia. over slide | φ220mm |
Spindle |
Spindle bore | φ62mm | *φ75mm |
Max. dia. of through-hole | φ52mm | *φ65mm |
Spindle nose | A2-6 | *A2-8 |
Spindle speed range | 4000rpm | *1600rpm *3500rpm |
*2000rpm |
Main motor power | 7.5/11kw, *11/15kw |
Axis |
X axis travel | 170mm |
Z axis travel | 450mm |
X/Z rapid traverse | 20/20m/min |
Turret |
Center height | 80mm |
No. of tool stations | 8, *12 |
Tool shank size | 25x25,*20x20mm |
Tailstock |
Type of tailstock | Hydraulic, *SST ,*HPT |
Taper of tailstock quill | MT4 |
Travel of tailstock quill | 90mm |
Travel of tailstock | 100-450mm |
Structure |
Slant bed degree | 35° |
Guideway type | LM |
Others |
Power capacity | 15kVA |
Overal dimension (L×W×H) | 2700x1750x1950mm |
Machine weight | 3700kg |