The whole structure of Shearing machine:
-Totally European design, streamlined looking.
-Remove rust with sand-blast and coated with anti-rust paint.
-Frames, assembly surfaces and connection holes are machined after the welding process,up to 60' in a single pass.
1. Hydraulic system
-Adopt integrated hydraulic control system, more reliable and easy for maintenance. Hydraulic system is from -Rexroth, Germany.
-All pipes, flange and joint with vibrations proof and leakage proof design and setting.
-All seals in cylinder is NOK from Japan, the most famous brand, good quality and high performance. -Overload overflow protection is outfitted to hydraulic system, which can assure no leakage, and the oil level can be read or seen directly.
-The hydraulic system is made in compliance with current regulations.
2. Electrical system
-Electrical Cabinet under the standard of IP55, Electrical under international CE Standard, safe and reliable, strong anti interference capability.
-Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch,easy to operate.
-Front Side Covers with safety switches, Back light safety guards,Foot pedal conforming to CE regulation.
3. Blade Adjust and Cutting Precision:
-Shearing angle is Variable, which can reduce the shearing deformation of sheet metal and can shear much thicker sheet metal.
-Adopt handwheel to rapidly and accurately adjust the blade clearance, Shearing in sections, shadow-line cutting.
-The rectangular monoblock blades featuring long life with 4 cutting edges, quality high-carbon high-chrome blades 6CrW2Si quality.
-Back gauge instal on the blade rest, along with the rest on the up and down movement, it's driven by a motor through the E21s system can control the plate before and after the position adjustment, behind.
-The adjusting range of the backstop material is 10 ~ 600mm, which can be adjusted freely in this range.
5. E21s NC Controller
-Backgauge and block control
-Control for AC motors, frequency inverter
-Holding/decompression time setting
-Program memory of up to 40 programs, up to 25 steps per program
-One side positioning
-One key backup/restore of parameters
|Max. Shearing Thickness
|Max. Shearing Width
|Number of Storke