Features:
It is a half-hydraulic 3-roller symmetrical rolling machine. It is used at room temperature, with this machine you can bending various profiles into some types. It can roll profile of cycle, spiral. Changing the model, it can bend and roll angle steel, flat steel, square steel, channel, steel, circle steel, pipe and so on. The machine is compact structure, reliable work, small volum, full functions, it is economical and practicl.

Model | WMT500-16 |
Max.bending resistence of section modulus cm | 16 |
Speed m/min | 6 |
Yielding limit MPa | ≤245 |
Inner-bending of angle steel | Max.section | 70×70×8 |
Min bending dia. mm | 1000 |
Min section | 30×30×3 |
Min bending Dia. mm | 550 |
Outer-bending of angle steel | Max.section | 80×80×8 |
Min bending dia. mm | 1000 |
Min section | 30×30×3 |
Min bending diameter mm | 550 |
Inner-bending of channel | The type of the channel | 12 |
Min bending dia. mm | 800 |
Outer-bending of channel | The type of the channel | 12 |
Min bending diameter mm | 900 |
Horizontal-bending of flat steel | Max. section | 150×25 |
Min bending diameter mm | 700 |
Vertical-bending of flat steel | Max. section | 75×16 |
Min bending dia. mm | 760 |
bending of square tube | Max. section | 60×4 |
Min bending dia. mm | 1000 |
Bending pipe | Max. section | 51x6 |
Min bending dia. mm | 800 |